Poker Forum > General Online Poker Discussion

IPoker Problems

(1/8) > >>

mike saban:
I"ve been having major issues with staying on IPoker the last 24 hours or so, keep connecting for a few minutes and then getting error messages advising the connection to Poker Server is down.

When I am connected, the software is very laggy and tables are very slow, my general connectivity is good - obviously cause I"m posting on here and other poker clients are fine, but interested to know if anyone else as been experiencing any problems recently ???

Trying to identify if its them with the issue, my isp not responding well to that type of traffic or my laptop with the software.

Thanks

AMRN:
This seems to be a common problem that loads of people have with iPoker. I used to suffer with it, until I adjusted my MTU setting on my ADSL router..... it was previous set at 1500, and I changed it to 1200.... and not had a problem since.

Don"t ask me what MTU is, or why changing it made a difference - I just followed someone"s advice on this forum and it worked nicely.

mike saban:
MTU = Maximum Transmission Unit, its to do with the amount of data contained in an data packet - ok starting to sound sad, so will stop there.

Thanks for the tip - will give it a try

SirPercival:

--- Quote from: AMRN on February 11, 2009, 19:28:56 PM ---
This seems to be a common problem that loads of people have with iPoker. I used to suffer with it, until I adjusted my MTU setting on my ADSL router..... it was previous set at 1500, and I changed it to 1200.... and not had a problem since.

Don"t ask me what MTU is, or why changing it made a difference - I just followed someone"s advice on this forum and it worked nicely.


--- End quote ---


Does anyone know how to log on to Steve"s pc and set it back to 1500??  ;)

mike saban:

--- Quote from: AMRN on February 11, 2009, 19:28:56 PM ---
This seems to be a common problem that loads of people have with iPoker. I used to suffer with it, until I adjusted my MTU setting on my ADSL router..... it was previous set at 1500, and I changed it to 1200.... and not had a problem since.

Don"t ask me what MTU is, or why changing it made a difference - I just followed someone"s advice on this forum and it worked nicely.



--- End quote ---


Ok, amended to the same settings, and so far so good, will keep an eye on it and see how we get on.

Many Thanks

Mike

Navigation

[0] Message Index

[#] Next page